Barite radiation shield, City Hospital Horb

Project: City hospital, Horb, Germany

Contractor (and Architects): Baugeschäft Dieterle GmbH & Co. KG, Schramberg, Germany

MEVA Systems: wall formwork Mammut 350, wall formwork StarTec, support Frame STB 450, slab formwork MevaFlex

Formwork Engineering: MEVA Schalungs-Systeme GmbH, Haiterbach, Germany



Hermetically sealed

Barite radiation shield

This inner-city project involved modernising and extending a hospital in the city of Horb, south western Germany. The basement will house a linear accelerator requiring very thick walls and slabs to hermetically seal the accelerator room and keep the radiation inside. Cramped inner-city conditions and working on slopes made the task a real challenge.

What is Barite concrete?
That’s a concrete mixture with barite as a heavy additive with a raw density of 4,000 to 4,300 kg/ m³. It is often used in buildings that house X-ray plants and for radiation protection in medicine and research. To optimise the protective function of such buildings, the concrete is poured in exceptionally thick walls and slabs.

Walls and slabs up to 1,90 m thick
The room housing the linear accelerator has walls that are 3,79 m high and between 1,50 m and 1,65 m thick. The slabs are up to 1,90 m thick. The viscous barite concrete required the use of a special pump. The ties were left in the pour and the openings sealed to ensure a hermetically sealed result. The slabs were formed using MevaFlex formwork with H20 beams supported by ME 350 props to carry the heavy loads.

Mammut 350 and support Frame STB 450
Walls and foundations were poured using the strongest available wall formwork – the Mammut 350 with a load capacity of 100 kN/m². It allows a free pour rate up to a height of 4 m. Single-sided wall formwork was supported by frame STB 450 to a height of 4,50 m. With its base width of only 2,45 m, the support frame was Slim enough for the cramped conditions.

  • MEVA Expertise & References

    MEVA Expertise & References

    Referencen for Projets in Commercial & Residential Construction, Architectural Construction, High-Rise Construction and Civil Engineering Construction

  • Large construction site in the heart of Budapest

    Large construction site in the heart of Budapest

    MEVA fulfils stringent requirements with flexible formwork solutions. The Budapest Zoo & Botanical Garden is one of the Hungary’s most popular cultural attractions.

  • Challenging tunnel geometry

    Challenging tunnel geometry

    MEVA STB 450 offers flexible solution for narrow, inclined rail section: Near the municipality of Gretzenbach, the four-track route branches into two separate lines. Here, the two southern tracks gradually descend and pass below the cantonal road before entering the new Eppenberg Tunnel.

  • BIM: transparent and efficient

    BIM: transparent and efficient

    BIM stands for Building Information Modelling, a holistic, software-based method for optimised planning and execution of construction projects.

All Plastic Facing alkus
MEVA Frame Profile
... more than just formwork
  •  Select language

    Select continent and country. Language selection optional.

  •  Contact
  •  Search

    Search on our website.

  •  Newsletter

    Subscribe to our monthly newsletter.